Universal Balancing Machines

ibalancing’s horizontal and vertical universal balancing machines are used to precisely balance a wide range of roll and disk shaped rotors. Their modular design makes them adaptable for many balancing tasks. Balancing correction with JZABM universal balancing machines is performed either manually or manually controlled..

Search Product

Single station milling balance correcting machine

Single station milling balance correcting machine

Apply to brake disc, brake drum, such as with a center hole or shaft, diameter φ300-φ550 mm disc parts.

CLICK INQUIRY

Product Features
Parameters

Introduction:

Apply to brake disc, brake drum, such as with a center hole or shaft, diameter φ300-φ550 mm disc parts, can test the unbalance of the work piece, to achieve automatic detection and weight,and re-test the residual unbalance of the work piece, the result of balancing the work pieces. The whole process of testing, de-duplication and re-testing does not need manual participation.

Features:

1.Adopts a filter circuit with built-in FFT Fourier analysis function;
2.To eliminate external vibration and other interference, high-precision measurement can be achieved;
3.Uses PLC control and is equipped with a fully functional software system, related calculation values;
4.Rotor specifications can be set and input once and can be called at will;
5.The equipment can be connected according to the customer's on-site assembly line, and special products can be highly customized.

Balancing method	Single-sided milling
Suitable workpiece	brake disc; impeller
Rotor weight	＜10Kg
Rotor diameter	＜Φ300mm
Minimum achievable residual unbalance	1gmm/kg
One time unbalance reduction rate	≥90%